(888) 857-9883

Top-rated independent appliance repair across the Mid-South

Ice Maker Repair — Book a Visit Today

We repair refrigerator ice makers, and most failures come down to the fill valve, the inlet line, the mold heater, the thermostat or sensor, or a control board that took a hit during a storm-season power blip. Call us and tell us what the bin looks like. The early signs are small: an empty bin, cubes welded into one brick, or water dripping down the back wall of the freezer and freezing into a sheet. Our visit starts with the simple stuff. We check water pressure at the valve, look for a clogged or kinked line, run the harvest cycle, and read the temperature the freezer is actually holding. Then we tell you what we found in plain words before anything gets replaced.

Call (888) 857-9883
  • Real people on the phone
  • 7 days a week
  • Quote in writing before any work

Taking calls until 5:00 PM CT

Ice Maker Repair technician at work
Local techs · quotes in writing
Ice Maker Repair — residential ice maker being serviced

The ice maker symptoms we hear most

  • The bin's been empty for two days No water reaching the mold: inlet valve, frozen fill tube, or a shut-off supply line
  • Cubes come out tiny and hollow Low fill volume from a restricted supply, a weak valve, or a clogged filter
  • Everything's frozen into one big clump Slow harvest cycle, leaking fill valve, or a freezer running colder than it should
  • Water runs down the back and freezes solid Cracked fill tube, loose supply connection, or a valve that overfills
  • It grinds, then stops mid-cycle Jammed ejector arm, stripped gear in the icemaker module, or a stalled motor

Safe things to check first

Worth a look before you call — sometimes it saves you the visit.

  • 1Make sure the icemaker's arm or switch is in the ON position, since it gets bumped when somebody loads groceries.
  • 2Check that the water shut-off behind or under the fridge is fully open and the line isn't crimped against the wall.
  • 3Look at the water filter date. A filter past due can choke the fill enough to shrink cubes.
  • 4Set a thermometer in the freezer and confirm it's holding near zero, since warm freezers stall ice production.

Guides & troubleshooting

Why homeowners pick a local independent shop

Logan Appliance RepairBig-box repair chainsHandyman listings
Quote in writing before a wrench comes out✓✕✕
A real person answers, 7 days a week✓✕✓
All major brands, gas and electric✓✓✕
Independent shop, nobody's quota✓✕✓
Local techs who know the housing stock✓✕✓

What homeowners say after the visit

“They had the dishwasher rack rollers on the truck. Twenty minutes, done, gone.”

Bruce K.Birmingham, AL

“The written quote listed the part number. I checked it online and the price was fair. Hired.”

Diane R.Newport News, VA

“Stove igniter clicked forever and never lit. Fixed on the first visit with zero drama.”

Pete C.Springfield, MO

Ice Maker Repair — quick answers

How long after a repair before I get ice again?

Most ice makers need several hours to finish a first full cycle after service. Expect a batch or two of small or cloudy cubes at first. Toss those. If the freezer is holding temperature, production usually looks normal inside a day.

Is it worth fixing the ice maker or should I replace the fridge?

Depends on what failed. A valve, fill tube, or icemaker module is a contained repair on an otherwise healthy refrigerator. If the sealed system is struggling too and the unit is well along in years, we'll tell you straight and let you decide.

Why does my ice taste stale?

Old cubes soak up freezer odors, especially when production is slow and the ice sits for weeks. Dump the bin, wash it, and check the water filter. If the taste comes back fast, the supply line or filter housing may need attention.

Can a power surge kill an ice maker?

Yes. Storms around here take out control boards regularly. The fridge may cool fine while the icemaker module or main board loses its ice routine. Diagnostics tell us whether the board, the module, or a sensor took the hit.

Do you work on door-dispenser models too?

We do. Dispenser trouble usually traces back to a stuck door flap, a frosted chute, a broken auger, or the same fill and harvest problems behind the bin. We service ice makers on all major refrigerator brands as an independent company.

What should I have ready when I call?

Brand and model number if you can reach it, usually inside the fresh food compartment. Tell us what the bin looks like, whether you hear any cycling sounds, and if water is pooling anywhere. That shortens the visit.

How it works

  1. Step 1

    Tell us the symptom

    Call us or fill out the form and tell us what you hear, smell, or see. Buzzing, leaking, no heat. Plain talk is fine. We'll ask a few questions and set a visit window.

  2. Step 2

    We come look

    A technician shows up in the window, pulls the unit out, and tests it. No guessing games. We explain what failed and why, in words that make sense on your back porch.

  3. Step 3

    We fix it

    Common parts ride with us, so a lot of repairs finish on that first visit. If a part has to be ordered, we tell you plainly and set the return date before we pull out of your driveway.

Call (888) 857-9883
  • A real person answers
  • Open 7 days
  • Written quote before work starts

Why homeowners call us

  • Storm-season surge damageLightning and blinking power hurt control boards. You get an oven that lights up but won't heat, or a washer that quits mid-cycle. We test boards and wiring before we replace anything, so you know what the surge actually took out.
  • Clay dust and lintRed clay dust and lint choke dryer vents and condenser coils. That's where long dry times and a hot laundry room come from, and it's why a fridge runs nonstop. We check airflow every visit, because a clogged vent kills a good machine slowly.
  • Straight talk, no runaroundWe tell you what's wrong and what it takes to fix. If a machine is worn past sense, we say that too, and you decide. No pressure and no jargon. We don't dress up an upsell as advice.
  • Independent and localWe're a Nashville crew, not a call center. As an independent shop we repair all major brands. Call us and you get a real person, somebody who knows the roads we drive.
  • All major brands, gas & electricIndependent service on Whirlpool, LG, Samsung, GE, Maytag, Bosch, KitchenAid and the rest.
  • Straight answersNot worth fixing? We say that out loud, and often it saves you the visit fee.

Ice Maker Repair

States9
Gas & electricBoth
All major brandsYes
Open7 days

Small faults become big ones on a schedule of their own

Describe the symptoms and we'll book the visit — takes about a minute.

  • A real person answers
  • Open 7 days
  • Written quotes
  • All major brands
  • Gas & electric
Call (888) 857-9883

Rather not call? Get a free quote →

Call now — a real person answers